Frisco Bridge

Frisco Bridge

Memphis & Arkansas Bridge, left
Frisco Bridge, center
Harahan Bridge, right
Carries 1 BNSF Railway rail line
Crosses Mississippi River
Locale West Memphis, Arkansas and Memphis, Tennessee
Maintained by BNSF Railway
Design Cantilevered through Truss bridge
Total length 4,887 feet (1,490 m)
Width 30 feet (9 m)
Longest span 791 feet (241 m)
Clearance below 109 feet (33 m)
Opened May 12, 1892

The Frisco Bridge, previously known as the Memphis Bridge, is a cantilevered through truss bridge[1] carrying a rail line across the Mississippi River between West Memphis, Arkansas and Memphis, Tennessee.

Contents

Construction

At the time of the Memphis bridge construction, it was a significant technological challenge and is considered to be chief engineer George S. Morison's crowning achievement. No other bridges had ever been attempted on the Lower Mississippi River.

The bridge is built entirely of open-hearth steel, a newly developed material at the time of construction. The structure features a 790 foot main span and two additional 600 foot spans. Its 65 foot height above the water was the highest clearance of any U.S. bridge of that era. The construction of the piers went nearly 100 feet below the water's surface.

Though some sources claim two cantilevered roadways were added to the bridge in the 1930s, one on each side,[2] they probably confuse this bridge with the neighboring Harahan Bridge, which had two cantilevered roadways from 1917 until the Memphis & Arkansas Bridge opened in 1949. Today, the Harahan Bridge still has the metal remains of its cantilevered roadways; the Frisco Bridge does not. However, pedestrians, buggies, and some automobiles used the main deck of the Frisco Bridge before the Harahan Bridge opened (the bridge was closed to such traffic while a train was crossing).[3]

Construction for the Kansas City, Fort Scott and Memphis Railroad began in 1888 and was completed May 12, 1892. In the end the project created a bridge that was the farthest south on the Mississippi River, featured the longest span in the United States and cost nearly 3 million dollars.[4]

A testament to its design and construction, as of 2009 the bridge is still used by BNSF Railway. The bridge is listed as a Historic Civil Engineering Landmark.[2]

See also

References

External links